How to correctly and quickly pre-drill fixing holes for LEGRABOX
Using a metre rule and pencil to mark drilling positions can be a cumbersome and error-prone process. That’s why we offer a simple and practical drilling template for the back and base of LEGRABOX drawers. The template is good for several assembly steps.
How to correctly and easily install Blum fittings in cabinets?
Blum’s universal drilling template makes it easy to pre-drill holes for fixing cabinet profiles, lift mechanisms, mounting and adapter plates. You can use the template with assembled and unassembled cabinets. Overlay and inset applications can be easily implemented. The calibration makes it simple to adjust the height and depth drilling position. The template allows you to drill holes of 5 mm or 2.5 mm in diameter. It is suitable for system and/or chipboard screws.
How do I install TIP-ON correctly with a SPACE TOWER?
Have you ever incorporated handle-less doors into your design? With TIP-ON, the mechanical opening support system, handle-less doors open by themselves – a brief touch is all that is required. This means that even large doors, such as those for the SPACE TOWER, can be opened without a handle. We would like to take this opportunity to explain what you need to pay attention to in the assembly and adjustment of this unit.
Sometimes it is necessary to equip a heavy door with an additional hinge directly at the customer’s place. ECODRILL is a hand-held tool that can be taken on site. In just a few steps you can set the drilling pattern precisely and drill it with a hand drill.
Which tool do I need to properly adjust the AVENTOS lift mechanism?
AVENTOS lift systems must open and close effortlessly and stay in any desired position. The lift mechanisms must therefore be adjusted according to the front weight. Please allow us to show you the best tool to use for this.
How to assemble drawers more precise and more efficient?
Have you ever assembled drawers without any assembly devices and you haven’t been happy with the result? BOXFIX E-T assists you to assemble TANDEMBOX drawers in a more precise and efficient way. You achieve high-quality results only in a few steps. BOXFIX E-T needs only little space and is set up and dismantled quickly.
AMBIA-LINE offers a universally applicable frame concept for inner division. This Blum system can be used not only in kitchens, but also in all other living areas.
It is particularly useful in kitchens to store bottles in a drawer. Standard drawer frames in steel design are available with widths of 100 and 200 mm and for nominal lengths 450 to 650 mm. Please find installation information on how to assemble AMBIA-LINE frames as bottle dividers below.
How do I optimise the trigger behaviour of SERVO-DRIVE flex?
With SERVO-DRIVE flex, refrigerators, freezers and dishwashers open especially easily with electrical support. If the front gap, bumper or drive unit are not correctly adjusted and/or installed, the doors may not open properly. Read the following article to find out how to solve this problem.