How do you adjust the AVENTOS HF lift mechanism to the front weight?
One important assembly step for the AVENTOS lift system is the adjustment of the two lift mechanisms to the weight of the furniture front. If the two lift mechanisms are not set correctly for the front weight, the front will spring up when opened, or close again by itself, as you can see in the video.
You know that lift mechanisms have been adjusted correctly if the lift system stays in any opening position in the end. It is important to adjust the lift mechanism to ensure smooth functioning, especially if lift mechanisms are fitted with SERVO-DRIVE.
In this video we explain how you can adjust the lift mechanisms correctly using a cordless screwdriver.
SERVO-DRIVE: How many SERVO-DRIVE units can be operated with one Blum transformer?
Fifty SERVO-DRIVE drive units can be operated with one Blum transformer. However, the following should be taken into account for the drive units for pull-outs and for AVENTOS lift systems in this case: one SERVO-DRIVE for AVENTOS drive unit requires around the same amount of power as three SERVO-DRIVE drive units for pull-outs.
How to adjust the front gap to 2.5 mm quickly and accurately
A front gap of just 2.5 mm is sufficient to ensure optimal trigger behaviour for TIP-ON BLUMOTION. To help achieve this, Blum has provided a front gap template for MOVENTO and LEGRABOX 65.5631, which enables the adjustment to be made quickly and easily on the TIP-ON BLUMOTION unit, directly on site.